Ø 26 mm Hinges for Furniture and Frame Doors
Ø 26 mm Hinges for Furniture and Frame Doors
Hinges with a Ø 26 mm cup diameter are compact furniture hinges used primarily when there is limited space for mounting in the door. They are especially well suited for frame doors with narrow frames, smaller furniture, bathroom cabinets, and other constructions where a standard hinge with a Ø 35 mm cup is too large.
When should you choose a Ø 26 mm hinge?
- Narrow frame doors: the smaller cup requires less space in the door frame than a Ø 35 mm hinge.
- Compact furniture: a good option when the construction has limited space for the hinge.
- Existing furniture: suitable when replacing older hinges where the door is already drilled for a Ø 26 mm cup.
Ø 26 mm was previously a common standard for furniture hinges and is still used in many pieces of furniture and custom constructions. When replacing an existing hinge, it is important to check both the cup diameter and the other mounting dimensions.
Different designs and opening angles
The range includes Ø 26 mm hinges for full overlay, half overlay, and inset doors, among others. There are also models for glass doors as well as specialty hinges for various angled constructions.
Which hinge you need depends on how the door will be positioned in relation to the cabinet box, the door construction, and the desired opening angle. Also check which mounting plate should be combined with the specific hinge model.
Frequently asked questions about Ø 26 mm hinges
What is a Ø 26 mm hinge?
A Ø 26 mm hinge is a concealed furniture hinge with a cup diameter of 26 mm. It is used mainly when there is limited space in the door or when an existing piece of furniture is already drilled for 26 mm hinges.
When should I choose Ø 26 mm instead of Ø 35 mm?
Ø 26 mm is a good choice for narrow frame doors, smaller furniture, and other constructions where a standard Ø 35 mm hinge takes up too much space. Ø 35 mm, on the other hand, is the most common standard for modern kitchen cabinet doors and cabinets.
Do Ø 26 mm hinges fit frame doors?
Yes, the smaller cup diameter makes Ø 26 mm hinges especially useful for frame doors with narrow frames where there is not enough material for a 35 mm cup.
Can I replace an old Ø 26 mm hinge with a new one?
Often you can, but the cup diameter is only one of the measurements that needs to match. Also check the drilling pattern, mounting dimensions, opening angle, door position, and which mounting plate is used before choosing a replacement hinge.
Are there Ø 26 mm hinges for full overlay and inset doors?
Yes, Ø 26 mm hinges are available in different designs for full overlay, half overlay, and inset doors, among others. The right model is selected based on how the door will be positioned in relation to the cabinet box.
Do I need a mounting plate for the Ø 26 mm hinge?
Yes, many Ø 26 mm hinges are used together with a separate mounting plate that attaches to the cabinet box. Always check which mounting plate is compatible with the specific hinge model.
How do I measure whether my existing hinge is Ø 26 mm?
Measure the diameter of the round recess, or cup, drilled into the back of the door. If the hole is about 26 mm in diameter, you normally need a hinge with a Ø 26 mm cup.